VEROLAC HIGH TEMPERATURE

SURFACE PREPARATION Surfaces should be cleaned with Brush Solvent T 300, be smooth and dry, free from dust, grease or rust and sanded.   APPLICATION Stir well before use. Apply one coat by roller, brush or airless spray gun without dilution and without primer. The thickness of the dry paint film is not necessary to exceed 30 microns. A second layer is not required. After application, 24 hours should elapse before warming the painted surface. Do not apply at temperatures below 5°C, above 35°C and/or relative humidity above 80%. ATTENTION: The product acquires maximum hardness and corrosion resistance, when after drying is heated gradually to 200°C – 300°C for one hour, where fumes may occur depending on the time that has elapsed between the painting and the achieved heating temperature. It is touch dry after 3-4 hours, depending on weather conditions (humidity and temperature). Clean rollers, brushes, floor stains, etc. with Spray Gun Solvent T 350 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.