Click on your preferred shade to see the available packaging.
Available Packages
A+ Quality System Internal Air
Premium Quality Ecological Emulsion Paint

Premium quality, ecological mat emulsion  paint for use on interior walls. It is certified according to the criteria of the European Union Ecolabelling Board (EUEB).

Very low odour paint during and after its application. Near zero VOC content. It contributes to the best indoor air quality and healthier environment as well due to the very low emissions on Volatile Organic Compounds (VOC).

It is certified with Indoor Air Comfort GOLD, the world’s most rigorous indoor emission rating system.

It provides great hiding power, unrivalled performance, exceptional whiteness and excellent durability to frequent washing (Class 1, EN 13300/ISO 11998).

• Ecological
• Virtually odorless
• IAC GOLD, A+ Indoor Air Quality
• High durability to frequent washing
• Superior opacity

Available in white and unlimited number of shades through Vitex’s Colorfull Tinting System.

Surface drying timeSurface drying time 30-60 min
Water dilution percentageWater dilution percentage 8-10%
Spreading rateSpreading rate 15-18 m2/lt
Application by brassApplication by brass
Application by rollerApplication by roller
Application by Spray gunApplication by Spray gun

Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.

To fill any cracks or holes use Acrylic Putty or Visto.

Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco.

New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with Acrylan Unco Eco or Blanco Eco.

Surfaces stained from smoke, graffity, coffee or any other kind of stain should first be primed with Blanco Eco.

For darker coatings (medium and transparent base) first apply one coat of Blanco Eco, as it is or slightly tinted to the shade of final coat.


Stir well before use. Apply two coats by roller, brush or by spray gun diluted up to 10% with water. Do not apply at temperatures below 5οC, above 35οC and/or relative humidity above 80%.

It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature). Allow at least 3 weeks before cleaning and washing newly painted surfaces with Vitex Eco. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water. After paint application, seal the pail and store it in temperatures between 5οC and 35οC for future use.

Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent. Do not dispose of liquid waste into ground water table. Unused paint requires special handling for safe disposal. Advice regarding disposal and collection should be sought from the local authority.

Find the Nearest Shop


    Certified, ecological, white matt, water-based undercoat of 100% acrylic resins. It has very good hiding power and is applied on interior and exterior surfaces. Its special formula allows for effectiv...
    The premium quality emulsion paint Vitex, unrivaled in spreading rate, durability and hiding power. It has excellent leveling properties producing a completely smooth, flat surface. Virtually odor...
    Ecological Satin Emulsion Paint
    Certified, ecological, silicone acrylic, micronized transparent water-based primer. Exhibits extremely low water absorption, waterproofs surfaces, has high water vapour permeability, excellent alkal...