Click on your preferred shade to see the available packaging.
Basic Colors
Available Packages
Cool Paint
Ultra-durable mat innovative NANO Acrylic paint for exterior masonry surfaces based on TRIBRID NANO Technology (Silica - Acrylic - Silicone). It offers superior performance, long lasting durability as well brighter colours which are looking fresher and will not fade, ensuring that the building continues to look beautiful over time.

Which are the common defect problems of exterior masonry walls?

Acrylan MAX offers superior performance, long lasting durability as well brighter colors which look “fresher” and will not fade, ensuring that the building continues to look “clean and fresh” over time.

Due to its strong inorganic character the painted surface dries fast after rainfall and provides a high water vapor - permeable coating.

With the application of Acrylan MAX, a 3D “Nano protection grid” is established on the wall surface. This has strong inorganic character and can combine all the benefits of the existing paint technologies in one!

Acrylan Max Brochure is available here


Available in white and an unlimited number shades through Vitex Coloring System.

White:  750mL, 3L, 10L
Bases: 1L, 3L, 10L

Surface drying timeSurface drying time 30-60 min
Water dilution percentageWater dilution percentage 0-10%
Spreading rateSpreading rate 15 – 17 m²/L
Application by brassApplication by brass
Application by rollerApplication by roller
Application by Spray gunApplication by Spray gun

Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint. To fill any cracks or holes use Acrylic Putty. Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco, Durovit or Vitosin, while old silicate and silicone substrates should be primed before with Acrylan MAX diluted 20% with water.

New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with Acrylan Unco Eco or Durovit. For darker shades it is recommended to apply one coat of PreColor Primer first, depending on the final shade and based on the color space of the top coat color.


Stir well before use. Apply two coats by roller, brush or airless spray gun diluted 8-10% with water.

Do not apply at temperature below 5°C, above 35°C and /or relative humidity above 70%. Avoid application when rain or frost is expected in the next 48 hours. It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature). Allow at least 3 weeks before cleaning and washing newly painted surfaces with Acrylan. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water.

Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.

Viscosity 110 ± 5 KU (ASTM D 562, 25°C)
Density 1,28 ± 0,02 Kg/L (ISO 2811) for the white
Gloss < 5 units at 60° (ISO 2813)

Containers must be kept closed in a cool, dry, well ventilated area protected from direct sunlight at temperatures between 5oC - 38oC.

Read label before use. For further instructions - precautions see Material Safety Data Sheet.

Find the Nearest Shop


  • PreColor Primer
    New technology white waterborne primer, based on acrylic resins, for exterior and interior use, that can be colored through Vitex Coloring System and increases coverage by reducing the numbers of laye...
    Transparent solvent-based acrylic undercoat. Waterproofs surfaces and allows them to “breathe”. It has excellent adhesion, penetrates into porous surfaces and is an ideal undercoat for final coating ...
    Certified, ecological, silicone acrylic, micronized transparent water-based primer. Exhibits extremely low water absorption, waterproofs surfaces, has high water vapour permeability, excellent alkal...