€0,00
Antifouling paint
High strength self-polishing organotin-free antifouling paint. Contains copper (I) oxide and specific controlled release biocides, protects submerged areas against bacteria, algae, seaweed, shellfish and generally adherent organisms on the hulls of vessels for 2-5 years depending on conditions. Ideal for hulls made of polyester, wood, steel, etc. (except aluminum) cruising at any speed.
Surface must be completely clean and dry at the time of application and the temperature must be above the dew point to avoid conden-sation of moisture. Make sure there is adequate ventilation during application and drying. To paint over old antifouling, abrade surface, remove dirt, algae, seaweed shellfish etc. and rinse thoroughly with fresh water at high pressure. If priming is required (old antifouling unknown or in poor condition) use Eumaria Vinyl Primer one Component. For complete drying are required 16 hours at 10°C, 8 hours at 15°C, 4 hours at 25°C, 3 hours at 35ºC. Painted surfaces can be safely used by humans and animals after drying time.
VITEX SA offers integrated solutions for Architectural Paints (VITEX), External Thermal Insulation Composite Systems (VitexthTherm), and Bituminous Waterproofing materials (Hermes), in more than 20 countries worldwide. Find out more
Vitex
Points of Sale
