EUMARIA CLASSIC

Surface must be completely clean and dry at the time of application and the temperature must be above the dew point to avoid condensation of moisture. Make sure there is adequate ventilation during application and drying. To paint over old antifouling, abrade surface, remove dirt, algae, seaweed shellfish etc. and rinse thoroughly with fresh water at high pressure. If priming is required (old antifouling unknown or in poor condition) use Eumaria Vinyl Primer one Component. For complete drying require 16 hours at 10°C, 8 hours at 15°C, 4 hours at 25°C, 3 hours at 35ºC. Tools must be cleaned immediately after use with solvent Τ-350.