VISTO READY FINE

SURFACE PREPARATION Surfaces must be clean, dry and smooth, free from dust, grease, loose material.   APPLICATION Apply using a spatula/knife or airless spray in one or two layers. Sanded after 3-4 hours with sandpaper and once cleaned, primed and then painted with any emulsion or enamel paint of Vitex. Do not apply at temperature below 5°C, above 35°C and / or relative humidity above 80%. It is touch dry in 2-3 hours.  The second layer is applied after 4-6 hours. Drying time depends on film thickness and weather conditions (humidity and temperature). Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.