ακρυλικά χρώματα, χρώματα εξωτερικού χώρου

ACRYLAN MAX

Ultra Durable Nano-Acrylic Paint

Description

Ultra-durable mat innovative NANO Acrylic paint for exterior masonry surfaces based on TRIBRID NANO Technology (Silica – Acrylic – Silicone).
It offers superior performance, long lasting durability as well brighter colours which are looking fresher and will not fade, ensuring that the building continues to look beautiful over time. Its unique Dirt Pick Up resistance and anti soiling tendency fights out inorganic, organic and biological pollutants and thereby retains
the initial beauty. Due to its strong inorganic character the painted surfaced dries fast after rainfall and provides a high water vapour permeable coating. Suitable for the painting and renovation of masonry and cement substrates, old silicate and silicone coatings, ETICS etc. where the adhesion is excellent when the proper primer is used. Acrylan MAX offers very high added value to the building due to lower renovation cost and longer lifetime as well as very low environmental impact. Acrylan MAX is a certified from the University of Athens, department of Physics as a cool paint characterized by high solar reflectance value (SR), high infrared emittance (ε) and high reflectance index value (SRI).

Advantages:

• MAX strength and adhesion
• MAX resistance to rain and air pollutants
• MAX shades stability
• MAX surface breathing
• Certified cold color
• Specially enhanced HD shades for maximum durability

COLOURS
Available in white and an unlimited number shades through Vitex Coloring System.

Technical specifications

Technical Specifications

Download

Security Instructions

Download

PREPARATION - APPLICATION

PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint. To fill any cracks or holes use Acrylic Putty. Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco, Durovit or Vitosin, while old silicate and silicone substrates should be primed before with Acrylan MAX diluted 15% with water.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with Acrylan Unco Eco or Durovit.For maximum opacity in dark and intense (such as blue, red and yellow) final shades, it is recommended to apply one coat of PreColor Primer colored – depending on the final shade – through Vitex Coloring System.
APPLICATION
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water.
Do not apply at temperature below 5°C, above 35°C and /or relative humidity above 70%. Avoid application when rain or frost is expected in the next 48 hours. It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature). Allow at least 3 weeks before cleaning and washing newly painted surfaces with Acrylan. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water.
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.