Two Component water-based Epoxy Primer
Two-component water-based epoxy primer with very strong adhesion on glossy surfaces, mosaics, old insulation, cementitious substrates, etc. Certifi ed with the CE marking according to EN 1504-2 and EN 13813.
• Ideal for horizontal surfaces
• Strong adhesion to glossy surfaces
• Exceptional mechanical properties
COLOURS
Transparent
| Απόδοση |
|---|
PREPARATION
Surfaces should be cleaned with water, be smooth and dry, free from dust, grease and sanded.
APPLICATION
Stir component A΄ gradually adding the entire quantity of component B΄ and stir well for approximately 3 minutes until complete homogenization. The mixture should be left to stand for 5-10 minutes after mixing the two components before the application. The pot life of the mixture is 2 hours at 30°C and 3 hours at 20°C. Apply one coat by brush, roller or spray gun. After 6-8 hours the surface is sanded using a suitable sandpaper. Wipe surface to clean off loose dust particles and apply Floorguard or any insulating coating of Vitex. The recoating interval time must be less than 2 days.
Vitex
Points of Sale
