WASH PRIMER

APPLICATION Stir component A΄ gradually adding the entire quantity of component B΄ and stir well for approximately 3 minutes until complete homogenization. Allow the mixture to rest for 5–10 minutes induction time prior to application. The pot life of the mixture is 2 hours at 30°C and 3 hours at 20°C. Apply one coat by brush, roller, airless spray gun without dilution. Do not apply at temperature below 5°C, above 35°C and/or relative humidity above 80%. It is touch dry in 45-60 minutes and can be recoated after 6-8 hours. The recoating interval time must be less than 2 days. When the coating is thoroughly dry, sand with an appropriate abrasive paper, remove the dust and then apply any Vitex’s enamel solvent based or water based paint. Drying time depends on weather conditions (humidity and temperature).