Name: VITO ROOF
SKU: vito_for_roofs
Availability: InStock

VITO ROOF

€0,00

Description

Acrylic waterprooﬁng and insulating paint with high elasticity for roofs. It creates a uniform, elastic, waterproof sealing layer, without forming seams or joints. It is an economic and reliable solution to waterprooﬁ ng. It has good adhesion to every structural surface (concrete, brick, wood, metal, etc.) and excellent resistance to adverse weather conditions and UV radiation while retaining its elasticity.
It offers energy savings and improvement of energy performance of the building by decreasing the roof temperature. Vito Elastomeric Insulating Paint is certiﬁed from the University of Athens, department of Physics as a cool material for roofs characterized by high solar reﬂectance value (SR), high infrared emittance (ε) and high reﬂectance index value (SRI).

Certiﬁed from the University of Athens, Department of Physics, as a cool material for roofs with the following properties:
Initial Total Solar Reﬂectance SR=0.84 (300-2500nm) (ASTM 903-96 and ASTM G159-98)
Infrared Emittance Factor ε = 0.89 (ASTM E 408-71 2002)
Solar Reﬂectance Index SRI = 106 (ASTME1980-01)

• Economical and reliable solution for waterprooﬁng
• Good adhesion to all substrates
• Contributes to energy saving
• Certiﬁed Cool Paint

COLOURS
Available in white.

Technical specifications

Technical Specifications

Download

Security Instructions

Download

PREPARATION - APPLICATION

SURFACE PREPARATION Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint. Cracks or joints should first be filled with Elastomeric Putty. Surfaces should be primed with Durovit diluted up to 30% with Brush Solvent T 300. APPLICATION Stir well before use. Apply cross-wise two coats, allowing 24 hours between each coat application, by roller, brush or airless spray gun diluted up to 5-10% with water for the first coat. Apply the second coat without dilution. Do not apply at temperature below 5°C, above 35°C and / or relative humidity above 70%. Avoid application when rain or frost is expected in the next 48 hours. It is touch-dry after 2-3 hours and can be recoated after 24-48 hours. Drying time depends on weather conditions (humidity and temperature). Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.