GRANIKOT SILICONE

SURFACE PREPARATION
Surfaces must be clean, dry, and free from dust, grease loose or flaking paint. To fill any cracks or holes use Acrylic Putty or Visto. New surfaces made of plaster, concrete, cement, rendering, plasterboard or surfaces previously covered with emulsion or acrylic water-based paints need to be primed with Granikot Primer.

APPLICATION
Stir well with a mechanical drill before use. Apply by stainless steel spatula and use a plastic trowel for forming the final texture, diluted with maximum 2% of water. Do not apply at temperature below 5°C, above 35°C and/or relative humidity above 80%. Do not apply in rainy, misty or windy weather. Protect surfaces from direct sunlight to prevent uneven drying. Do not expose to direct sunlight. Must not freeze. It is touch dry in 4-6 hours and cured after 24 hours. Drying time depends on weather conditions (humidity and temperature). After the material is completely cured, there is no further need to protect the surface from inclement weather. Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.