FLOORGUARD HYBRID PU

SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.To fill any cracks or holes use Acrylic Putty.
Floorguard Hybrid PU is applied directly to concrete without any primer. High absorbing or loose surfaces should be primed with Durovit or Acrylan Unco Eco.

APPLICATION
Stir well before use. Apply two or three coats by roller, brush or airless spray gun. First coat diluted up to 15-20% with water, and second coat up to 5-10%. Do not apply at temperature below 5°C, above 35°C and/ or relative humidity above 70%. Avoid application when rain or frost is expected in the next 48 hours. It is touch-dry after 30-60 minutes and can be recoated after 6-8 hours. Drying time depends on weather conditions (humidity and temperature). Allow at least 3 weeks before cleaning and washing with water and a mild detergent newly painted surfaces with Floorguard Hybrid PU.
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.