Mixture of modified natural oils combined with wax. It can be used to refresh and preserve wooden surfaces like teak, oregon, rosewood, mahogany etc. as well as for all bare woods. It is suitable for interior and exterior use. It penetrates deeply through the wood pores preventing the penetration of water and enhances its natural beauty.
Refresh, preserve and protect the wood from the strong sunlight and humidity.
Surfaces should be smooth, clean, dry, free from grease, rosins or old varnishes.
Stir well before use. Apply one coat by brush or piece of cloth without dilution. Wipe excess material after 5 minutes with a dry cloth. Apply a second coat for tough wood or when wood is exposed to adverse weather conditions. Do not apply at temperatures below 5°C, above 35°C and/or relative humidity above 80%.
It is touch dry after 2-3 hours and can be recoated after 2 days. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent.