ANTI-RUST PRIMER - Vitex.gr

ANTI-RUST PRIMER

ANTI-RUST PRIMER
Click on your preferred shade to see the available packaging.
Available Packages
Quick drying primer for high anticorrosion protection. Extremely durable, protects metallic surfaces and properly prepares them for the final coating. It provides adhesion, hiding power, elasticity and excellent leveling.

Quick drying primer, based on modified alkyd resins, with excellent anticorrosive protection. It provides the perfect substrate for enamels used on metallic surfaces, presents exceptional adhesion, hiding power, elasticity and excellent levelling.

• Quick drying primer
• High anticorrosive protection

COLOURS

Available in brown and grey.

Surface drying timeSurface drying time 45-60min
Solvent dilution percentage Solvent dilution percentage 5%
Spreading rateSpreading rate 12-14 m2/lt
Application by brassApplication by brass
Application by rollerApplication by roller
Application by Spray gunApplication by Spray gun

SURFACE PREPARATION
Surfaces should be cleaned with Brush Solvent T 300, be smooth and dry, free from dust, grease or rust and abrased.

APPLICATION
Stir well before use. Apply one or two coats by roller or brush diluted up to 5% with Brush Solvent T 300 or airless spray gun diluted up to 5% with Spray Gun Solvent T 350. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch dry after 45-60 minutes and can be recoated after 20-24 hours. When the coating is thoroughly dry, sand with an appropriate abrasive paper to produce a smooth surface, remove the dust and then apply any Vitex’s enamel water based or solvent based paint. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.

Find the Nearest Shop

SeeAlso

  • VEROLAC
    Gloss tough enamel with high hiding power, elasticity and durability. Very good working and leveling properties. Beautifies and decorates with 44 readymade shades.
  • WASH PRIMER
    High quality anti-corrosive two-component primer with very strong adhesion on smooth and glossy surfaces such as aluminium, galvanized steel, iron plates, polyester, glass and stainless steel metals.
  • MINIO
    Anticorrosive undercoat based on alkyd resins and strong anticorrosive pigments. Full protection against corrosionof metals with excellent hiding power and adhesion. The new MINIO type is a new techno...
  • ACRYLAN SILICON
    Silicone acrylate high quality product with excellent water vapor permeability, low water absorption and high durability. Ideal for areas with high humidity and extreme weather conditions.