A luxurious silk finish ecological emulsion paint for interior use certified according to the criteria of the European Union Ecolabelling Board (EUEB), according to standard EN 71-3:2013 for non-heavy metal migration from toys and toys materials and by the Industrial Microbiological Services Ltd Registered in England according to ISO 22196:2007. It is virtually odourless during its application because it does not contain ammonia or other dangerous substances, such as aromatic hydrocarbons, free formaldehyde, heavy metals or alkylphenolethoxylates. It has great levelling properties and produces a velvet surface on plaster, concrete, plasterboard, etc. It provides superior whiteness, great hiding power, high spreading rate and exceptional fastness to frequent washing (Class 1, EN 13300/ISO 11998), detergents and yellowing owed to smoking.
Available in white and a wide range of shades through Vitex’s Colorfull Tinting System.
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty or Visto.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with Acrylan Unco Eco or Blanco Eco.
Surfaces stained from smoke, graffity, coffee or any other kind of stain should first be primed with Blanco Eco.
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C, above 35°C and / or relative humidity above 80%.
It is touch-dry after 45-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature).
Allow at least 3 weeks before cleaning and washing newly painted surfaces with Vitex Satin Eco. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water. After paint application, seal the pail and store it in temperatures between 5oC and 35oC for future use.
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent. Do not dispose of liquid waste into ground water table. Unused paint requires special handling for safe disposal. Advice regarding disposal and collection should be sought from the local authority.