VEROLAC - Vitex.gr

VEROLAC

Gloss tough enamel with high hiding power, elasticity and durability. Very good working and leveling properties. Beautifies and decorates with 44 readymade shades.

It is very durable, gloss enamel based on alkyd resins, suitable for interior and exterior use on metallic surfaces. It forms a hard film that retains its gloss and shade unchanged, even if exposed to adverse weather conditions or washed. Due to its special formulation is excellent anticorrosion finish for all kinds of metallic surfaces. Offers high hiding power, excellent working and levelling properties, providing protection and decoration.

• Gloss tough enamel
• High quality and durability

COLOURS

Available in white, black and 42 more shades (refer to colour card).

Surface drying timeSurface drying time 2-3h
Solvent dilution percentage Solvent dilution percentage 5%
Spreading rateSpreading rate 14-16m2/lt
Application by brassApplication by brass
Application by rollerApplication by roller
Application by Spray gunApplication by Spray gun

SURFACE PREPARATION
Surfaces should be cleaned with Brush Solvent T 300, be smooth and dry, free from dust, grease or rust and sanded.
Metallic surfaces should be coated with an anticorrosive primer (Anti-Rust Primer, Minio New Type or Metal Primer).
Glossy metallic surfaces (aluminum, galvanized steel etc) should be first coated with Primer for Glossy Surfaces or surfaces Wash Primer.

APPLICATION
Stir well before use. Apply two coats by roller or brush diluted up to 5% with Brush Solvent T 300 or airless spray gun diluted up to 5% with Spray Gun Solvent T 350. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch dry after 2-3 hours and can be recoated after 20-24 hours. Drying time depends on weather conditions (humidity and temperature). Allow at least 30 days before cleaning and washing newly painted surfaces with Verolac.
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.

Find the Nearest Shop

SeeAlso

  • VELATURA
    Undercoat for wooden surfaces. Covers and effectively fills the surface and is easy to sand. Perfectly prepares the surface for the final coating with water-based or solvent-based enamels.
  • ANTI-RUST PRIMER
    Quick drying primer for high anticorrosion protection. Extremely durable, protects metallic surfaces and properly prepares them for the final coating. It provides adhesion, hiding power, elasticity an...
  • PLATINUM
    High quality polyurehane enamel new formula, available in gloss, satin, mat, suitable for interior and exterior use. It can be applied onto all wooden surfaces such as doors, windows, cupboards etc....
  • ACRYLAN SILICON
    Silicone acrylate high quality product with excellent water vapor permeability, low water absorption and high durability. Ideal for areas with high humidity and extreme weather conditions.