VELATURA - Vitex.gr

VELATURA

VELATURA
Click on your preferred shade to see the available packaging.
Colors
Available Packages
Undercoat for wooden surfaces. Covers and effectively fills the surface and is easy to sand. Perfectly prepares the surface for the final coating with water-based or solvent-based enamels.

White, matt, solvent-based alkyd undercoat. It provides a perfect substrate for enamels, especially when applied to wooden surfaces. Produces an excellent surface for finishing with enamels (Verolac, Platinum, Aquavit). It offers hiding power and whiteness, while at the same time it combines good brushability, excellent levelling, easy sanding and resistance to sagging.

• High hiding power
• Excellent brushability, leveling and easy sanding

COLOURS

Available in white.

Surface drying timeSurface drying time 2-3h
Solvent dilution percentage Solvent dilution percentage 0-3%
Spreading rateSpreading rate 16-18m2/lt
Application by brassApplication by brass
Application by rollerApplication by roller
Application by Spray gunApplication by Spray gun

SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
On new wooden surfaces scrape off the knots and then apply wood preservative Diaxyl Decor.
To fill any cracks or holes use Acrylic Putty.

APPLICATION
Stir well before use. Apply one or two coats by roller or brush diluted up to 3% with Brush Solvent T 300 or airless spray gun diluted up to 3% with Spray Gun Solvent T 350. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.
It is touch dry after 2-3 hours and can be recoated after 16-18 hours. When the coating is thoroughly dry, use an appropriate abrasive paper to produce a smooth surface, remove the dust and apply any Vitex’s enamel water based or solvent based paint. Drying time depends on weather conditions (humidity and temperature).
Clean rollers, brushes, floor stains, etc. with Brush Solvent T 300 and then with soapy water or detergent. Use Spray Gun Solvent T 350 to clean spray guns.

Find the Nearest Shop

SeeAlso

  • VEROLAC
    Gloss tough enamel with high hiding power, elasticity and durability. Very good working and leveling properties. Beautifies and decorates with 44 readymade shades.
  • PLATINUM
    High quality polyurehane enamel new formula, available in gloss, satin, mat, suitable for interior and exterior use. It can be applied onto all wooden surfaces such as doors, windows, cupboards etc....
  • VELATURA ECO
    Ideal undercoat to every water-based or solvent-based enamels, covers and effectively fills the surface, dries quickly and is easy to sand. Ideally prepares any surface for the final coating.
  • METAL PRIMER
    Ideal undercoat for metallic surfaces. It combines excellent brushability, perfect leveling and easy sanding. Used for wall pretreatment isolating stains, patches, spots, yellowing, etc.