ACRYLAN UNCO ECO - Vitex.gr

ACRYLAN UNCO ECO

ACRYLAN UNCO ECO
Click on your preferred shade to see the available packaging.
Available Packages
Ecolabel
Certified, ecological, silicone acrylic, micronized transparent water-based primer. Exhibits extremely low water absorption, waterproofs surfaces, has high water vapour permeability, excellent alkali resistance, strong adhesion and due to the extremely small particle sizeit penetrates into ‘weak’ surfaces.

Ecological, silicone acrylic, water-based transparent primer, specially designed for strong adhesion and outstanding penetration into porous mineral substrates, because of its small particle size (< 0.05 μm). It is certified according to the criteria of the European Union Ecolabelling Board (EUEB). It is suitable for both interior and exterior use. It exhibits low water absorption, waterproofing characteristics, high water vapour permeability and excellent alkali resistance. It can be used as ideal undercoat for surfaces (plaster, concrete, bricks, inferior quality paints etc.) that are planned to be painted with water-based paints (emulsions, acrylics, elastomeric, relief, etc.). It is environmentally and user friendly, because does not contain ammonia or other dangerous substances, such as aromatic hydrocarbons, free formaldehyde, heavy metals or alkylphenolethoxylates.

 

  • Ecological
  • Silicone
  • Strong adhesion and penetration
  • Small particle size

 

COLOURS

Available in semi-transparent.

Surface drying timeSurface drying time 45min
Water dilution percentageWater dilution percentage 0-100%
Spreading rateSpreading rate 12-14m2/lt
Application by brassApplication by brass
Application by rollerApplication by roller
Application by Spray gunApplication by Spray gun

SURFACE PREPARATION

Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.

 

APPLICATION

Stir well before use. Apply one coat by roller, brush or airless spray gun diluted up to 50% with water. For low absorbing surfaces thinning can be up to 100% with clean water, while for high absorbing surfaces it can be used without thinning. Do not apply at temperatures below 5oC, above 35oC and/or relative humidity above 80%.

It is touch-dry after 45 minutes and can be recoated after 4-6 hours with Vitex’s emulsion or acrylic paints. Drying time depends on weather conditions (humidity and temperature). After paint application, seal the pail and store it in temperatures between 5oC and 35oC for future use.

Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent. Do not dispose of liquid waste into ground water table. Unused paint requires special handling for safe disposal. Advice regarding disposal and collection should be sought from the local authority.

Find the Nearest Shop

SeeAlso

  • VITO ECO
    Certified ecological emulsion paint with great hiding power and high spreading rate. Easy to apply with very good leveling properties producing a smooth, flat surface.
  • DUROVIT
    Transparent solvent-based acrylic undercoat. Waterproofs surfaces and allows them to “breathe”. It has excellent adhesion, penetrates into porous surfaces and is an ideal undercoat for final coating ...
  • VITEX CLASSIC
    The premium quality emulsion paint Vitex, unrivaled in spreading rate, durability and hiding power. It has excellent leveling properties producing a completely smooth, flat surface. Virtually odor...
  • ACRYLAN
    High quality acrylic paint, based on 100% acrylic resins, suitable for exterior use. It provides great hiding power, unrivaled spreading rate, superior whiteness and exceptional resistance to frequent...