ACRYLIC WATER-BASED PAINT FOR CONCRETE SURFACES - Vitex.gr
intensivpflege hanau
Agario agario unblocked io games Agario agario play agar

ACRYLIC WATER-BASED PAINT FOR CONCRETE SURFACES

High quality water-based acrylic concrete paint, specially formulated for direct application on concrete, plaster, brick and other alkaline masonry surfaces. It provides great hiding power, high spreading rate and exceptional resistance to washing and adverse weather conditions. Available in four shades.

Premium quality acrylic paint for exterior use. Due to its special formula, it is suitable for application on concrete and alkaline masonry surfaces. It provides great hiding power, high spreading rate and exceptional fastness to washing and atmospheric weathering.

• Concrete paint
• Direct application on concrete and alkaline masonry surfaces
• High spreading rate

COLOURS

Available in white and 4 ready-made shades (see relevant colour card).

Surface drying timeSurface drying time 30-60min
Water dilution percentageWater dilution percentage 0-10%
Spreading rateSpreading rate 12-15m2/lt
Application by brassApplication by brass
Application by rollerApplication by roller
Application by Spray gunApplication by Spray gun

SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco, Durovit or Vitosin.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with Acrylan Unco Eco or Durovit.

 

APPLICATION

Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C, above 35°C and / or relative humidity above 70%. Avoid application when rain or frost is expected in the next 48 hours.

It is touch-dry after 30-60 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature).

Allow at least 3 weeks before cleaning and washing newly painted surfaces with Concrete Paint. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water.

Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.

Find the Nearest Shop

SeeAlso

  • VITO FOR CONCRETE SURFACES ACRYLIC WATER-BASED PAINT
    for Concrete Surfaces Acrylic water-based concrete paint water for outdoor use. Due to its excellent resistance to alkali it is recommended for painting and protection of all concrete surfaces. Avail...
  • ACRYLAN
    High quality acrylic paint, based on 100% acrylic resins, suitable for exterior use. It provides great hiding power, unrivaled spreading rate, superior whiteness and exceptional resistance to frequent...
  • CIMENTOL
    Solvent-based concrete paint Acrylic solvent-based concrete paint for outdoor, suitable for walls, concrete floors, tiles, garage, tennis courts etc. It offers great durability against adverse weathe...
  • DUROVIT
    Transparent solvent-based acrylic undercoat. Waterproofs surfaces and allows them to “breathe”. It has excellent adhesion, penetrates into porous surfaces and is an ideal undercoat for final coating ...