Ready to use white fine-grained finishing putty of large surfaces in paste, suitable for interior walls and ceilings of plaster, gypsumboard and concrete surfaces where required perfect surface finishing (with bright lighting, decoration styles, etc). It dries quickly and sanded very easily creating a very smooth, uniform and cohesive surface paintable with emulsion or enamel paints. It can be applied even in very thin layer. Certified with the CE marking according to EN 13963.
Available in white.
Surfaces must be clean, dry and smooth, free from dust, grease, loose material.
Apply using a spatula/knife or airless spray in one or two layers. Sanded after 3-4 hours with sandpaper and once cleaned, primed and then painted with any emulsion or enamel paint of Vitex. Do not apply at temperature below 5°C, above 35°C and / or relative humidity above 80%.
It is touch dry in 2-3 hours. The second layer is applied after 4-6 hours. Drying time depends on film thickness and weather conditions (humidity and temperature).
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.