Emulsion acrylic paint, for exterior use, based on acrylic copolymer resins. It exhibits great hiding power and high spreading capacity combined with its low cost makes it ideal solution for surfaces that require frequent painting. Easy to apply with very good leveling end produces a smooth flat surface.
• Based on acrylic copolymer resins
• Great hiding power
Available in white and a wide range of shades through Vitex’s Colorfull Tinting System.
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco, Durovit or Vitosin.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with Acrylan Unco Eco or Durovit.
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C, above 35°C and / or relative humidity above 70%. Avoid application when rain or frost is expected in the next 48 hours.
It is touch-dry after 15-30 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature).
Allow at least 3 weeks before cleaning and washing newly painted surfaces with Vista Acrylic Paint. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water.
Tools must be cleaned immediately after use with water and if neededwith soapy water or a detergent.